The Platform · Part 3 of 3

Topside.

The topside is what the platform carries — and the topside configuration is the variable that distinguishes one application from another. The Anchor Tension System foundation, pylon stack, and tensioning column are constant across every deployment; the topside configuration is selected per application from a fixed set of options.

Cross-arms, cap beams and multi-deck configurations.

For transmission, distribution, and communications applications, the topside is a series of cross-arms captured at engineered pylon segment joints. The cross-arms carry the conductors, antennas, or other point-load equipment, with the cross-arm geometry per voltage class and circuit configuration. Patent 6 of the MMC Patent Family — Pole and Tower Architecture — protects this topside configuration.

For viaduct applications, the topside is a deck or series of decks supported by either a single-pylon cap beam (for narrower single-service viaducts) or a paired-pylon portal frame (for wider multi-modal viaducts). Multi-deck configurations stack two, three, or more service decks at engineered heights between the pylons, each deck carrying its own MM Line or combination of MM Lines. Patent 5 of the MMC Patent Family — Multimodal Viaduct Topside — protects the viaduct topside configurations.

Multimodal Viaduct Topside (P5) →   Pole and Tower Architecture (P6) →

The seven designs

MMC-DWG-002-01 MMC-VCMMC-VC · One leg, one deckMMC-DWG-002-02 MMC-VBMMC-VB · Two legs, two decksMMC-DWG-002-03 MMC-VAMMC-VA · Two legs, five levelsMMC-DWG-002-08 MMC-VDMMC-VD · Two legs, three levelsMMC-DWG-002-04 MMC-TBMMC-TB · Single leg, cross-armsMMC-DWG-002-05 MMC-TB GuyedMMC-TB Guyed · Single leg, guyedMMC-DWG-002-06 MMC-TAMMC-TA · Two towers, one cross-beam

Clamped by the tension.

On the viaducts the tension tubular passes through holes in the outer longitudinal beams and the cross beam. The tension clamps the beams into the pylon, and the holes help with the dampening. On the towers the cross-arms are captured at segment joints.

Each design’s parts, with quantities per km: Components →

Install Topside, by design.

Two build pages cover the family: the multimodal corridor (viaduct) and the transmission line (towers).

Patent coverage: P5 Multimodal Viaduct Topside · P6 Pole and Tower Architecture · Patent family →

← PylonService Tools & Equipment →